The Details Of Iron On

- Jan 11, 2019-

1. The embroidered chapter should be kept clean before the hot side, and the temperature should be adjusted to the temperature of the suitable clothing according to the method of the iron.

2, put the embroidery chapter in the appropriate position of the demand (the glue does not tear off), hot a few times back and forth, ordinary hot for about 15 seconds can be

3, in order to avoid burns, you can put a thin cotton cloth on the embroidered chapter. After the hot finish, check the edge to see if it is hot, and burn a few times on the edge.

4, according to the thickness of the embroidery chapter to determine the temperature, thicker, must be higher temperature, hot time is longer. For a particularly thick embroidered chapter, you can burn it a few times on the reverse side.